Hey Alex, DPC(E) needs to spend entire PFE for tunneling, all front-plate ports on that PFE will be disabled.
MPC can do tunneling without dedicating PFE for it. I'm sure it's documented somewhere. On Mon, 31 Dec 2018 at 17:14, Alex Martino via juniper-nsp <[email protected]> wrote: > > Hi, > > I need to configure a GRE tunnel between two MX960 (configuration is > RE-S-2000, MX-SCB, DPCE 4x 10GE R and DPCE 40x 1GE R). The 10G is fpc 0 and > 1G is fpc 1. > > I wonder if this is even supported? > > When I configure the chassis fpc 0 pic 0-3 tunnel-services bandwidth 10g, the > router drop traffic on all interfaces. The same configuration on fpc 1 pic > 0-3 seems to work. > > Is there a trick or something to be aware of? > > Thanks, > Alex > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -- ++ytti _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
