Thank you Saku, that make sense then. Thanks, Alex
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Monday, 31 December 2018 16:58, Saku Ytti <[email protected]> wrote: > Hey Alex, > > DPC(E) needs to spend entire PFE for tunneling, all front-plate ports > on that PFE will be disabled. > > MPC can do tunneling without dedicating PFE for it. > > I'm sure it's documented somewhere. > > On Mon, 31 Dec 2018 at 17:14, Alex Martino via juniper-nsp > [email protected] wrote: > > > Hi, > > I need to configure a GRE tunnel between two MX960 (configuration is > > RE-S-2000, MX-SCB, DPCE 4x 10GE R and DPCE 40x 1GE R). The 10G is fpc 0 and > > 1G is fpc 1. > > I wonder if this is even supported? > > When I configure the chassis fpc 0 pic 0-3 tunnel-services bandwidth 10g, > > the router drop traffic on all interfaces. The same configuration on fpc 1 > > pic 0-3 seems to work. > > Is there a trick or something to be aware of? > > Thanks, > > Alex > > > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > -- > > ++ytti _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
