Hi, On 02.01.2019 11:49, Saku Ytti wrote:
Trio does IPFIX in HW, it can inspect each and every packet with no different cost. So if your flow table can survive it, do 1:1 and get more visibility.
AFAIK not all Trio Generations and variants are able to do 1:1 at Line Rate. IIRC MPC5E and newer are very close to 1:1 in all scenarios while older MPC/TRIO were lower (in the 1:4 - 1:10 range worst case) I think it was one of the marketed benefits of MPC5 and MPC2/3-NG that they now can do 1:1 while the older stuff was not able to do so. Of course you can argue whether line rate 64k packets are actually a typical use case or not ;) -- Kind Regards Tobias Heister _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
