Hi,
On 02.01.2019 13:18, [email protected] wrote:
From 16.1R1 and up you should also configure the ip flow table sizes
as the default is 1024 entries for v4 if I'm not mistaken. Not sure if
this is your current issue but is something to consider as well. Also
check flex-flow-sizing as an option.
Note that changing the flow table sizes has traditionally resulted in
a reboot of the line card.
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/ipv4-flow-table-size.html
"NOTE: Prior to Junos OS Release 16.1R1 and 15.1F2, any changes in the configured
size of the flow table initiates an automatic reboot of the FPC, and we recommend that
you run this command in a maintenance window."
Whatever this means for now ;)
I kind of remember that we changed that without reboot on 16.x and 17.x code on
some routers.
--
Kind Regards
Tobias Heister
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
