On DPCs you need to set the bandwidth setting. set chassis fpc <n> pic <n> tunnel-services bandwidth <10g - 100g>
Be advised that this will burn a 10 gig port for each 10 gigs you assign to tunnel-services. Regard, Clay Haynes Sent from my iPhone > On 29 Aug 2019, at 10:50, Jeff Meyers <[email protected]> wrote: > > Hi list, > > I'm trying to setup a GRE tunnel interface on a MX480 with DPCE > linecards. I want to use xe-5/4/0 and have therefore configured this > interface under 'edit chassis' for tunnel-services. The interface > vanishes as expected. I have then configured the interface gr-5/4/0 with > unit 0 but is not being created. It's the same behaviour on a secondary > MX router so I might be missing something. I am running Junos 13.3 > respectively 15.1 on the routers I tested this with. > > I am unable to identify the reason right now, maybe someone from this > list can help me with that? Thanks in advance! > > Best > Jeff > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
