On Wed, May 6, 2020 at 9:41 AM Brian Johnson <[email protected]> wrote:
>
> So you have a 4x10G breakout and a 100G QSFP28 in the same group of 3
> interfaces and they are all working? Just because I can install and configure
> the optics, doesn’t mean they will function. This would conflict with what is
> coming from Juniper Product teams.
>
> To be clear, I realize that the ports do not “disappear” because you insert
> the QSP28 into the port group, just that they will not work. :)
We've been this with MPC7s, works fine. You can squeeze the 240g out
of each PIC just fine, you simply cannot oversub.
fpc 7 {
pic 0 {
port 2 {
speed 100g;
}
port 4 {
speed 10g;
}
port 5 {
speed 100g;
}
}
}
ports 4 and 5 in same 'group of 3', et-7/05 up at 100g and
xe-7/0/4:[0-3] up at 10g.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
