Is there a Juniper SE that has the ability to answer these questions? On Fri, Apr 9, 2021 at 12:49 PM Colton Conor <[email protected]> wrote:
> For the ACX line, what is the Maximum number of MPLS labels in a packet’s > label stack (push, pop, and swap operations)? Specifically, mostly > interested in the ACX5048 and ACX2200's > > I found the following chart for the QFX line, and it was extremely > helpful. I haven't been able to find the same information for the ACX Line > however: > https://www.juniper.net/documentation/en_US/junos/topics/reference/general/mpls-scaling-values-qfx-series.html > > > Can anyone confirm or deny if the ACX5048's hardware is identical to the > QFX5100? My understanding is they run a different JUNOS load on them, but > hardware wise they are extremely similar. On the hardware side, is there > anything in the ACX5048 that would allow more MPLS labels in a packet’s > label stack than the QFX5100? > > For the ACX line, do they support streaming telemetry? I am not sure > exactly what to look for on the streaming telemetry support for the ACX. I > basically just want to see realtime interface and optical stats. Which JTI > feature is that? > > For the ACX5000, there are only 3 items listed under the Junos Telemetry > Interface section. > > > https://apps.juniper.net/feature-explorer/select-platform.html?category=Routing&typ=1#family=&pid=10105000&platform=ACX5000&rel=20.4R1&sid=1093&stat=0.42180881218269106&swName=Junos%20OS > > For comparison, the QFX 5100 shows 21 different features under the JTI > Section: > > https://apps.juniper.net/feature-explorer/select-platform.html?category=Switching&typ=1#family=&pid=31705100&platform=QFX5100&rel=20.4R1&sid=1093&stat=0.566764714896294&swName=Junos%20OS > > Which feature am I looking for? Yes, I know this will require a collector > of some sort. > > > > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
