Igor:
Heya. Some quick feedback:
> > Since it's just a NID status setting, I don't think
> > a restart is required at all. If a VPN is active, the user
> > should get a message saying "The Master Node status will be
> > changed after your GetEngaged partner disconnects". If there
> > is no VPN active, the switch should happen immediately.
>
> I'll implement above.
Thanks.
> > 1. When Kaboodle starts up, it asks the LAN for a NID. If
> > it doesn't get one, it builds one *and* it sets itself
> > as the Master Node. Correct?
> When Kaboodle starts up, it asks the LAN for a NID
> *only* if it's Master Node.
Actually, Kaboodle should always ask the LAN for a NID
when it starts up. It should not matter if it's the first time
or the seventh time.
> > 2. When I hit "Refresh" on a PC that's not the Master Node,
> > it still pings all of the Class-C's that it knows about.
> > Correct?
> When I hit "Refresh" on a PC that's not the Master Node,
> it didn't pings at all.
It should. A non-Master Kaboodle should ping the LAN when
the user hits "refresh".
-Scott
> > On Fri, 27 Sep 2002, Igor Kotelevsky wrote:
> >
> > > Hello Scott.
> > > "Master node" implemented as following:
> > > 1. Only the master node pings.
> > > 2. Only the master node connects with Gnutella to the GetEngaged
> servers.
> > > 3. A user can change the "Master node" status (on/off) in the bottom
> part of
> > > "System Info" tab.
> > > 4. That changing will take effect after PC restarts.
> > > A user'll see a respective MessageBox -
> > > *Your settings will take effect after PC*
> > > *<PcName> restarts*.
> > > 5. The "Master node" status is a part of NID data.
> > > A user can see and change that status as for itself as for others PC's.
> > >
> > > - Igor
> > >
> > > ----- Original Message -----
> > > From: "Scott C. Best" <[EMAIL PROTECTED]>
> > > To: "Igor Kotelevsky" <[EMAIL PROTECTED]>
> > > Cc: <[EMAIL PROTECTED]>
> > > Sent: Wednesday, September 25, 2002 9:36 AM
> > > Subject: Re: 21 Sept bug report
> > > > 1. The "master node" setup. Only the master node pings. Only
> > > > the master node connects with Gnutella to the GetEngaged
> > > > servers. Registration and Partnership files only need to
> > > > be installed on the master node.
> > >
> > >
> > >
> >
> >
>
>
>
>
>
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Kaboodle-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/kaboodle-devel
