Hello Scott. A. About *ping*. The things you asked implemented: > The Kaboodle Master Node handles all of these types. The > non-Master nodes should do *only* #3, the Refresh button pings.
B. About *"Connect" button*. You asked: > Would it be possible that the "Connect" button still works, > but only Partnerships that are known the Master Node can be initiated? I don't see how that can be implemented. Now the "Remote Networks" tab works as following. If Kaboodle isn't a "Master Node", then only button "Create New Partnership" is grayed out and the tab has the text *This PC is not a* *"Master Node",* *so the button* *"Create New Partnership"* *is grayed out* - Igor ----- Original Message ----- From: "Scott C. Best" <[EMAIL PROTECTED]> To: "Igor Kotelevsky" <[EMAIL PROTECTED]> Cc: "Kaboodle-devel" <[EMAIL PROTECTED]> Sent: Tuesday, October 01, 2002 11:25 PM Subject: Re: Master node > Igor: > Sorry, I should clarify: > > > A. About *ping*. > > At Tuesday, October 01, 2002 4:45 AM you wrote: > > > > > 1. When Kaboodle starts up, it asks the LAN for a NID. If > > > > > it doesn't get one, it builds one *and* it sets itself > > > > > as the Master Node. Correct? > > > > When Kaboodle starts up, it asks the LAN for a NID > > > > *only* if it's Master Node. > > > > > > Actually, Kaboodle should always ask the LAN for a NID > > > when it starts up. It should not matter if it's the first time > > > or the seventh time. > > > > > > > > 2. When I hit "Refresh" on a PC that's not the Master Node, > > > > > it still pings all of the Class-C's that it knows about. > > > > > Correct? > > > > When I hit "Refresh" on a PC that's not the Master Node, > > > > it didn't pings at all. > > > > > > It should. A non-Master Kaboodle should ping the LAN when > > > the user hits "refresh". > > I implemented things #1, #2 as your asked. > > At Wednesday, September 25, 2002 9:36 AM you wrote: > > > ...Only the master node pings... > > Kaboodle has four "types" of pings: > > 1. When Kaboodle starts up, if it fails to get a NID from the LAN, > it pings all of the Class-C's it can auto-detect (and it sets > itself as the Master Node). > > 2. When a new device is "sniffed" and is added to the NID, the > Kaboodle Master Node should ping all of the Class-C subnets > it knows about. > > 3. When the user hits Refresh in Kaboodle, that Kaboodle instance > should ping all of the Class-C subnets it knows about. > > 4. Every 5 seconds, the Kaboodle Master Node should ping the > devices known to be in its "active list" to see if they're > still active. > > The Kaboodle Master Node handles all of these types. The > non-Master nodes should do *only* #3, the Refresh button pings. > > > > B. About *restart*. > > At Friday, September 27, 2002 8:11 PM you wrote: > > > Sounds good except for the "after PC restarts" idea. > > > Since it's just a NID status setting, I don't think > > > a restart is required at all. If a VPN is active, the user > > > should get a message saying "The Master Node status will be > > > changed after your GetEngaged partner disconnects". If there > > > is no VPN active, the switch should happen immediately. > > These things are implemented. > > Thanks! > > > Also I implemented following. > > If PC is not a "Master Node", > > then both buttons "Connect" and "Create New Partnership" > > on the "Remote Networks" tab are grayed out and that tab has > > the text > > *This PC is not a* *"Master Node",* > > *so both buttons "Connect" and "Create* > > *New Partnership" are* *grayed out* > > Please let me know what you think about that. > > I'm not sure about this. Would it be possible that the > "Connect" button still works, but only Partnerships that are known > to the Master Node can be initiated? > > > C. ZeBeDee bug. > > I see a bug (both Win2000 and Win98): > > - I try to make remote network connection. > > - I didn't have ZeBeDee component on both Kaboodles. > > - I push the button "Connect" in "Remote Networks" tab. > > - I see the MessageBox > > *Sorry... Kaboodle could not start Zebedee on your PC. This connection > > will be in View-Only"...* > > - After that I get "debug assertion failed" > > - Kaboodle crash > > Yup, that's a bug. :) > > -Scott > > > > > ----- Original Message ----- > > From: "Scott C. Best" <[EMAIL PROTECTED]> > > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > > Cc: "Kaboodle-devel" <[EMAIL PROTECTED]> > > Sent: Tuesday, October 01, 2002 4:45 AM > > Subject: Re: Master node > > > > > > > Igor: > > > > > > Heya. Some quick feedback: > > > > > > > > Since it's just a NID status setting, I don't think > > > > > a restart is required at all. If a VPN is active, the user > > > > > should get a message saying "The Master Node status will be > > > > > changed after your GetEngaged partner disconnects". If there > > > > > is no VPN active, the switch should happen immediately. > > > > > > > > I'll implement above. > > > > > > Thanks. > > > > > > > > 1. When Kaboodle starts up, it asks the LAN for a NID. If > > > > > it doesn't get one, it builds one *and* it sets itself > > > > > as the Master Node. Correct? > > > > When Kaboodle starts up, it asks the LAN for a NID > > > > *only* if it's Master Node. > > > > > > Actually, Kaboodle should always ask the LAN for a NID > > > when it starts up. It should not matter if it's the first time > > > or the seventh time. > > > > > > > > 2. When I hit "Refresh" on a PC that's not the Master Node, > > > > > it still pings all of the Class-C's that it knows about. > > > > > Correct? > > > > When I hit "Refresh" on a PC that's not the Master Node, > > > > it didn't pings at all. > > > > > > It should. A non-Master Kaboodle should ping the LAN when > > > the user hits "refresh". > > > > > > -Scott > > > > > > > > > > > On Fri, 27 Sep 2002, Igor Kotelevsky wrote: > > > > > > > > > > > Hello Scott. > > > > > > "Master node" implemented as following: > > > > > > 1. Only the master node pings. > > > > > > 2. Only the master node connects with Gnutella to the GetEngaged > > > > servers. > > > > > > 3. A user can change the "Master node" status (on/off) in the bottom > > > > part of > > > > > > "System Info" tab. > > > > > > 4. That changing will take effect after PC restarts. > > > > > > A user'll see a respective MessageBox - > > > > > > *Your settings will take effect after PC* > > > > > > *<PcName> restarts*. > > > > > > 5. The "Master node" status is a part of NID data. > > > > > > A user can see and change that status as for itself as for others > > PC's. > > > > > > > > > > > > - Igor > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: "Scott C. Best" <[EMAIL PROTECTED]> > > > > > > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > > > > > > Cc: <[EMAIL PROTECTED]> > > > > > > Sent: Wednesday, September 25, 2002 9:36 AM > > > > > > Subject: Re: 21 Sept bug report > > > > > > > 1. The "master node" setup. Only the master node pings. Only > > > > > > > the master node connects with Gnutella to the GetEngaged > > > > > > > servers. Registration and Partnership files only need to > > > > > > > be installed on the master node. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Kaboodle-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/kaboodle-devel
