|
No one seems to have replied to this message a
month ago. I missed it at the time.
First of all, I'm really suprised to see that
you're running on an MIPS R6000. That's
an multi-chip ECL CPU from the 1980s that was
mostly installed in CDC servers.
Is that really correct? The R6000 was the
original "MIPS II" CPU, and there could
easily be code in Linux and Kaffe that lumps the
R6000 in with other, not-quite-compatible
processors.
That having been said, if you search the Kaffe
mailing list archives, you will
see that I observed the same problem months
ago. First of all, you need to know
that Kaffe 1.0.7 will not build and run correctly
on MIPS unless you apply a patch.
Kaffe 1.1.0 will build as distributed but you must
not build it with the JIT, which
was unfortunately still the default MIPS build as
of 1.1.0. When you configure,
you need to specify ".configure
--with-engine=intrp".
Regards,
Kevin K.
|
- [kaffe] Help me !!! I porting the kaf... "유홍식"
- Re: [kaffe] Help me !!! I portin... Kevin D. Kissell
- Re: [kaffe] Help me !!! I po... Atsushi Nemoto
- Re: [kaffe] Help me !!! ... Dalibor Topic
- Re: [kaffe] Help me ... Ito Kazumitsu
- Re: [kaffe] Hel... Atsushi Nemoto
- Re: [kaffe]... Dalibor Topic
