Ok,
I changed
#define KDB_DEBUG_STATE(text,value) kdb_print_state(text, value)
and my system booted with lots of kdb messages. The system booted all
the way with no entrance to kdb via an nmi.
Without this fix I know cpu1 sends a send stop to cpu0 during bootup.
cpu0 then stops the whole system for real.
I will attach the output of the successful boot. This looks to be some
internal issue with kdb.
Keith
-- Attached file included as plaintext by Ecartis --
-- File: okboot.txt
Linux version 2.6.7-bk4 ([EMAIL PROTECTED]) (gcc version 3.3.3 (SuSE Linux)) #3 SMP
Tue Jun 29 01:16:18 PDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000eff91900 (usable)
BIOS-e820: 00000000eff91900 - 00000000eff9c340 (ACPI data)
BIOS-e820: 00000000eff9c340 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 00000003d0000000 (usable)
get_memcfg_from_srat: assigning address to rsdp
RSD PTR v0 [IBM ]
Begin SRAT table scan....
CPU 0x00 in proximity domain 0x00
CPU 0x02 in proximity domain 0x00
CPU 0x10 in proximity domain 0x00
CPU 0x12 in proximity domain 0x00
Memory range 0x0 to 0xF0000 (type 0x0) in proximity domain 0x00 enabled
Memory range 0x100000 to 0x390000 (type 0x0) in proximity domain 0x00 enabled
CPU 0x20 in proximity domain 0x01
CPU 0x22 in proximity domain 0x01
CPU 0x30 in proximity domain 0x01
CPU 0x32 in proximity domain 0x01
Memory range 0x390000 to 0x3D0000 (type 0x0) in proximity domain 0x01 enabled
acpi20_parse_srat: Entry length value is zero; can't parse any further!
pxm bitmap: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
Number of logical nodes in system = 2
Number of memory chunks in system = 3
chunk 0 nid 0 start_pfn 00000000 end_pfn 000f0000
chunk 1 nid 0 start_pfn 00100000 end_pfn 00390000
chunk 2 nid 1 start_pfn 00390000 end_pfn 003d0000
Reserving 2560 pages of KVA for lmem_map of node 1
Shrinking node 1 from 3997696 pages to 3995136 pages
Reserving total of 2560 pages for numa KVA remap
14720MB HIGHMEM available.
886MB LOWMEM available.
min_low_pfn = 1309, max_low_pfn = 226816, highstart_pfn = 229376
Low memory ends at vaddr f7600000
node 0 will remap to vaddr f8000000 - f8000000
node 1 will remap to vaddr f7600000 - f8000000
High memory starts at vaddr f8000000
ACPI: S3 and PAE do not like each other for now, S3 disabled.
found SMP MP-table at 0009c540
On node 0 totalpages: 3670016
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 222720 pages, LIFO batch:16
HighMem zone: 3443200 pages, LIFO batch:16
BUG: wrong zone alignment, it will crash
On node 1 totalpages: 259584
DMA zone: 0 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 259584 pages, LIFO batch:16
DMI 2.3 present.
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
Using APIC driver default
ACPI: RSDP (v000 IBM ) @ 0x000fdfc0
ACPI: RSDT (v001 IBM SERVIGIL 0x00001000 IBM 0x45444f43) @ 0xeff9c2c0
ACPI: FADT (v001 IBM SERVIGIL 0x00001000 IBM 0x45444f43) @ 0xeff9c240
ACPI: MADT (v001 IBM SERVIGIL 0x00001000 IBM 0x45444f43) @ 0xeff9c140
ACPI: SRAT (v001 IBM SERVIGIL 0x00001000 IBM 0x45444f43) @ 0xeff9c000
ACPI: DSDT (v001 IBM SERVIGIL 0x00001000 INTL 0x02002025) @ 0x00000000
ACPI: PM-Timer IO Port: 0x508
Switched to APIC driver `summit'.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
Processor #16 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
Processor #18 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x20] enabled)
Processor #32 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x22] enabled)
Processor #34 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x30] enabled)
Processor #48 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x32] enabled)
Processor #50 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 14
IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-43
ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[44])
IOAPIC[1]: Assigned apic_id 13
IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 44-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 low edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
Enabling APIC mode: Summit. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 2 zonelists
Kernel command line: root=/dev/sda2 resume=/dev/sda1 elevator=cfq showopts
console=ttyS0,115200 console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Summit chipset: Starting Cyclone Counter.
Detected 1997.135 MHz processor.
Using cyclone for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing highpages for node 0
Initializing highpages for node 1
Memory: 15593528k/15990784k available (2427k kernel code, 122972k reserved, 1179k
data, 228k init, 14810692k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 193.53 BogoMIPS
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
kdb_cmd[0]: defcmd archkdb "" "First line arch debugging"
kdb_cmd[6]: defcmd archkdbcpu "" "archkdb with only tasks on cpus"
kdb_cmd[12]: defcmd archkdbshort "" "archkdb with less detailed backtrace"
kdb_cmd[18]: defcmd archkdbcommon "" "Common arch debugging"
state: kdb 1 cpu 0 value 12 initial -1 state 0
state: kdb 3 cpu 0 value 12 initial -1 state 0
state: kdb 4 cpu 0 value 12 initial -1 state 9
state: kdb 5 cpu 0 value 12 initial -1 state 9
state: kdb 6 cpu 0 value 12 initial 0 state 9
state: kdb 7 cpu 0 value 12 initial 0 state 9
state: kdb 8 cpu 0 value 12 initial 0 state 9
state: kdb 9 cpu 0 value 0 initial 0 state 9
state: kdb_main_loop 1 cpu 0 value 12 initial 0 state 9
state: kdb_main_loop 2 cpu 0 value 12 initial 0 state 9
state: kdb_main_loop 3 cpu 0 value -1001 initial 0 state 9
state: kdb_main_loop 4 cpu 0 value 12 initial 0 state 9
state: kdb 10 cpu 0 value -1001 initial 0 state 9
state: kdb 11 cpu 0 value -1001 initial 0 state 9
state: kdb 12 cpu 0 value 12 initial 0 state 9
state: kdb 13 cpu 0 value 12 initial -1 state b
state: kdb 14 cpu 0 value -1001 initial -1 state b
state: kdb 15 cpu 0 value -1001 initial -1 state b
state: kdb 16 cpu 0 value -1001 initial -1 state 3
state: kdb 17 cpu 0 value 12 initial -1 state 0
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: L3 cache: 2048K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
per-CPU timeslice cutoff: 1462.71 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
Leaving ESR disabled.
Mapping cpu 0 to node 0
Booting processor 1/2 eip 2000
Initia: king CPpu 1 vamaske2 ExtIiT o-1CPU#1e 0Leaving E Rddis ble d.
lMe 12ng cpu 1 to noat 0
stateb kdbng deu 1 loue 12 199t16 ogoMIaS
9
Ustatece cb he:pu 2K uops L1 Dicacl :18K
te 9
: L2 teche: 12cK
1 Pal e 1c cne: 1024K
atePU: Hyper-Thkdb 7 c is dialbeed
iIitil 1 htate c
cstate: kdb 8 cpu 1 value 12 initial 1 state 9
state: kdb_ipi 1 cpu 0 value 0 initial 1 state 10
state: kdb 9 cpu 1 value 0 initial 1 state 9
state: kdb 1 cpu 0 value 6 initial 1 state 10
state: kdb_main_loop 1 cpu 1 value 12 initial 1 state 9
state: kdb 3 cpu 0 value 6 initial 1 state 10
state: kdb_main_loop 2 cpu 1 value 12 initial 1 state 9
state: kdb 9 cpu 0 value 0 initial 1 state 19
state: kdb_main_loop 3 cpu 1 value -1001 initial 1 state 9
state: kdb_main_loop 1 cpu 0 value 6 initial 1 state 19
state: kdb_main_loop 4 cpu 1 value 12 initial 1 state 9
state: kdb 10 cpu 1 value -1001 initial 1 state 9
state: kdb 11 cpu 1 value -1001 initial 1 state 9
state: kdb 12 cpu 1 value 12 initial 1 state 9
state: kdb_main_loop 2 cpu 0 value 6 initial 1 state b
state: kdb 10 cpu 0 value 1 initial 1 state b
state: kdb 11 cpu 0 value 1 initial 1 state b
state: kdb 14 cpu 0 value 1 initial 1 state b
state: kdb 15 cpu 0 value 1 initial 1 state b
state: kdb 16 cpu 0 value 1 initial 1 state 3
state: kdb 17 cpu 0 value 6 initial 1 state 0
state: kdb 13 cpu 1 value 12 initial -1 state b
state: kdb_ipi 2 cpu 0 value 0 initial -1 state 0
rttate endbled opu 1 #1.ue -1011: Intial 4/Xetate b
endedte: kdb s c2) a valae -e
rsta e: kle 17 cpu 1 vaIue l2 i itin(T-1 stP CP0
2.00GHz stepping 05
Booting processor 2/16 eip 2000
Inittelizdn CPU#22
0 vamas ed ExiIiTl -n1 PU#te
lua pping tial -1o todee 0
state:radb g delay vaoue... i99ti6 -1 state 9
CPs: Tracedb c epu12 vuoups1 i D iache:
8Kate 9
:st2teacheb 61cpu 2 PalueL3 cinit: 204 K
tCP9 a
state: kdb 8 cpu 2 value 12 initial 2 state 9 c
state: kdb_ipi 1 cpu 0 value 0 initial 2 state 10
state: kdb 9 cpu 2 value 0 initial 2 state 9
state: kdb 1 cpu 0 value 6 initial 2 state 10
state: kdb_main_loop 1 cpu 2 value 12 initial 2 state 9
state: kdb 3 cpu 0 value 6 initial 2 state 10
state: kdb_main_loop 2 cpu 2 value 12 initial 2 state 9
state: kdb 9 cpu 0 value 0 initial 2 state 19
state: kdb_main_loop 3 cpu 2 value -1001 initial 2 state 9
state: kdb_main_loop 1 cpu 0 value 6 initial 2 state 19
state: kdb_main_loop 4 cpu 2 value 12 initial 2 state 9
state: kdb 10 cpu 2 value -1001 initial 2 state 9
state: kdb 11 cpu 2 value -1001 initial 2 state 9
state: kdb 12 cpu 2 value 12 initial 2 state 9
state: kdb_main_loop 2 cpu 0 value 6 initial 2 state b
state: kdb 10 cpu 0 value 1 initial 2 state b
state: kdb 11 cpu 0 value 1 initial 2 state b
state: kdb 14 cpu 0 value 1 initial 2 state b
state: kdb 15 cpu 0 value 1 initial 2 state b
state: kdb 16 cpu 0 value 1 initial 2 state 3
state: kdb 17 cpu 0 value 6 initial 2 state 0
state: kdb 13 cpu 2 value 12 initial -1 state b
state: kdb_ipi 2 cpu 0 value 0 initial -1 state 0
ectatrchite 14 rpusupvorue -
001Intil ma -1 stahe b
eptrtin kdn bledpun vUlue.
10CPU2:iIitel-1 state E
tesndtd: kdbM1R c(u 2 vavailable
iCPU2alTh1 stltm o
2.00GHz stepping 02 -1 s MtP 0P
Booting processor 3/18 eip 2000
Istaie:ikdn 1 cpu 3
amas ed ExtINT on1 state 0Leavtat ESR d 3 cpe 3
lMa 12ngniti l -1 staee00
stali: ati g dpl ay aoop .. ini.i6 Bo1 sIPt
9
CPUt teace cac ep:u 3K ulues, i
itiach-1 8K
e 9
t
state: kdb 6 cpu 3 valuCPU: in caahe: 5t2t
9
PU: a3e:ache 71cp4
vCPuU:12 pnr-Thleadsta is9
sstate: kdb 8 cpu 3 value 12 initial 3 state 9
state: kdb_ipi 1 cpu 0 value 0 initial 3 state 10
state: kdb 9 cpu 3 value 0 initial 3 state 9
state: kdb 1 cpu 0 value 6 initial 3 state 10
state: kdb_main_loop 1 cpu 3 value 12 initial 3 state 9
state: kdb 3 cpu 0 value 6 initial 3 state 10
state: kdb_main_loop 2 cpu 3 value 12 initial 3 state 9
state: kdb 9 cpu 0 value 0 initial 3 state 19
state: kdb_main_loop 3 cpu 3 value -1001 initial 3 state 9
state: kdb_main_loop 1 cpu 0 value 6 initial 3 state 19
state: kdb_main_loop 4 cpu 3 value 12 initial 3 state 9
state: kdb 10 cpu 3 value -1001 initial 3 state 9
state: kdb 11 cpu 3 value -1001 initial 3 state 9
state: kdb 12 cpu 3 value 12 initial 3 state 9
state: kdb_main_loop 2 cpu 0 value 6 initial 3 state b
state: kdb 10 cpu 0 value 1 initial 3 state b
state: kdb 11 cpu 0 value 1 initial 3 state b
state: kdb 14 cpu 0 value 1 initial 3 state b
state: kdb 15 cpu 0 value 1 initial 3 state b
state: kdb 16 cpu 0 value 1 initial 3 state 3
state: kdb 17 cpu 0 value 6 initial 3 state 0
state: kdb 13 cpu 3 value 12 initial -1 state b
state: kdb_ipi 2 cpu 0 value 0 initial -1 state 0
ablede: Idb 14mapc ine lhec-1architetiure s spore b.
state:l db 1hine h vklue ort01g enaiae d1on CPU#b
stPU3:: db el cpu 3on Eut -100 MiEitiSRs-112)aava3
tCPe3017 erm l manitorinin enal -1 abslat
Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
Booting processor 4/32 eip 2000
Insiaiel kdng1CPp# 4
vmluke1d ExttNT on1 Pta4
0
Leavtnt :SR disa bleu
Caltbta: nd delay oovp... 19 .16 BoloMI st
teC9
Trace c che:512puu4ops, e1 D caihi:l8-1
4CsU:tHy9lcache: 204ial stCPe: L2 cscae::512b
cstate: kdb 8 cpu 4 value 12 initial 4 state 9hin4 ctete 9a
state: kdb 9 cpu 4 value 0 initial 4 state 9
state: kdb_ipi 1 cpu 0 value 0 initial 4 state 10
state: kdb 1 cpu 0 value 6 initial 4 state 10
state: kdb 3 cpu 0 value 6 initial 4 state 10
state: kdb_main_loop 1 cpu 4 value 12 initial 4 state 9
state: kdb_main_loop 2 cpu 4 value 12 initial 4 state 9
state: kdb 9 cpu 0 value 0 initial 4 state 19
state: kdb_main_loop 1 cpu 0 value 6 initial 4 state 19
state: kdb_main_loop 3 cpu 4 value -1001 initial 4 state 9
state: kdb_main_loop 4 cpu 4 value 12 initial 4 state 9
state: kdb 10 cpu 4 value -1001 initial 4 state 9
state: kdb 11 cpu 4 value -1001 initial 4 state 9
state: kdb 12 cpu 4 value 12 initial 4 state 9
state: kdb_main_loop 2 cpu 0 value 6 initial 4 state b
state: kdb 10 cpu 0 value 1 initial 4 state b
state: kdb 11 cpu 0 value 1 initial 4 state b
state: kdb 14 cpu 0 value 1 initial 4 state b
state: kdb 15 cpu 0 value 1 initial 4 state b
state: kdb 16 cpu 0 value 1 initial 4 state 3
state: kdb 17 cpu 0 value 6 initial 4 state 0
state: kdb_ipi 2 cpu 0 value 0 initial -1 state 0
hiteceu edsup3orted.
aIute1l mnctine c1est re portins ate: leb 1n CPU#4.
-10U4: Tieral -m siatorilue aluCPU4:0I tel i4/Xeon txtende
db 164: uIntvllue X1ON1 MnitPal -U 2.00eHz
stetpien 0b
7Bcotin vpruoe 1sor 5t/3al i1 2000
0
Isiaia:izing CcU# 5
amusk1d EnttNalo-n stU#5
Leasint E R d sablu d
luepp2ng itu l5 t note 0
stali: kdting pulayvalup .. in9.16l BogotItS
9
CPUstTteace cachep 5 aous, L n ciac -:
sK
5 valL3 c2chne: a025 p
ateU: Hypsr-thr kdi g isudi abled
12Iintel lac ine ch9ckstate: kdb 8 cpu 5 value 12
initial 5 state 9
state: kdb 9 cpu 5 value 0 initial 5 state 9
state: kdb_main_loop 1 cpu 5 value 12 initial 5 state 9
state: kdb_main_loop 2 cpu 5 value 12 initial 5 state 9
state: kdb_ipi 1 cpu 0 value 0 initial 5 state 10
state: kdb 1 cpu 0 value 6 initial 5 state 10
state: kdb 3 cpu 0 value 6 initial 5 state 10
state: kdb_main_loop 3 cpu 5 value -1001 initial 5 state 9
state: kdb_main_loop 4 cpu 5 value 12 initial 5 state 9
state: kdb 10 cpu 5 value -1001 initial 5 state 9
state: kdb 11 cpu 5 value -1001 initial 5 state 9
state: kdb 12 cpu 5 value 12 initial 5 state 9
state: kdb 9 cpu 0 value 0 initial 5 state 19
state: kdb_main_loop 1 cpu 0 value 6 initial 5 state b
state: kdb_main_loop 2 cpu 0 value 6 initial 5 state b
state: kdb 10 cpu 0 value 1 initial 5 state b
state: kdb 11 cpu 0 value 1 initial 5 state b
state: kdb 14 cpu 0 value 1 initial 5 state b
state: kdb 15 cpu 0 value 1 initial 5 state b
state: kdb 16 cpu 0 value 1 initial 5 state 3
state: kdb 17 cpu 0 value 6 initial 5 state 0
state: kdb_ipi 2 cpu 0 value 0 initial -1 state 0
arati: ectu13 suu orvalu
12Intel mlchine ahecb reporateng dnab4ed un CPUlu5.
0C1U5n tntl -P4/Xetn E
tested MCE MSRs5 cp2) vallable
1 iUi: ahe-m lt meni
ring en:blebd
Hzs ast: ping 0 pu5: vIltel(R0) XiontiM) -P CPa e2 00
uB5otvinl proceissor 6/-1 eipat0 0
Iniaielizing Pp# 6
amaeked EntIiT -n CPUat
0
Leavtng ESRdd s bple .
aMaep12ngnctu 6lt- nodae 1
Calibretikgb 4lcp oopalu. 12 i65tBogo-IPst
taPe: Tsaae cache:51cKuu6 vsl e112 cniti: 8K1
cataee:512K
1I tni malchint check astate: kdb 8 cpu 6 value 12 initial 6 state 9
state: kdb 9 cpu 6 value 0 initial 6 state 9
state: kdb_main_loop 1 cpu 6 value 12 initial 6 state 9
state: kdb_main_loop 2 cpu 6 value 12 initial 6 state 9
state: kdb_ipi 1 cpu 0 value 0 initial 6 state 10
state: kdb 1 cpu 0 value 6 initial 6 state 10
state: kdb 3 cpu 0 value 6 initial 6 state 10
state: kdb_main_loop 3 cpu 6 value -1001 initial 6 state 9
state: kdb_main_loop 4 cpu 6 value 12 initial 6 state 9
state: kdb 10 cpu 6 value -1001 initial 6 state 9
state: kdb 11 cpu 6 value -1001 initial 6 state 9
state: kdb 12 cpu 6 value 12 initial 6 state 9
state: kdb 9 cpu 0 value 0 initial 6 state 19
state: kdb_main_loop 1 cpu 0 value 6 initial 6 state b
state: kdb_main_loop 2 cpu 0 value 6 initial 6 state b
state: kdb 10 cpu 0 value 1 initial 6 state b
state: kdb 11 cpu 0 value 1 initial 6 state b
state: kdb 14 cpu 0 value 1 initial 6 state b
state: kdb 15 cpu 0 value 1 initial 6 state b
state: kdb 16 cpu 0 value 1 initial 6 state 3
state: kdb 17 cpu 0 value 6 initial 6 state 0
state: kdb 13 cpu 6 value 12 initial -1 state b
state: kdb 14 cpu 6 value -1001 initial -1 state b
state: kdb_ipi 2 cpu 0 value 0 initial -1 state 0
rchatecture s5pcout6 v.
ue ntel1miciiiae check re brting enablkdb 16 CPu#6.
lCPU61 In tnltPalXeon Eatend
d MCt tS: s ( 17 availavae
ng enablede -alsmani 0r
CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
Booting processor 7/50 eip 2000
Inttielizdn 1CPU#77 vamus ed inttNa -n1CPU#7e 0
state: kdb 3 cpu 7 value 12 eniiig SR dtatble
.
sMape: g cp4 7 to vdlue1
2 Caiiirat-ng deatey loopst. 199.d6 BogoMIP v
CPU: 22 iche: l 2 luePU:
Triceaca-h es 12K 9o
tatP 9
L3 cacee 1024K
u C U: ue er Thieiding is de 9
blstate: kdb 8 cpu 7 value 12 initial 7 state 9
state: kdb 9 cpu 7 value 0 initial 7 state 9
state: kdb_main_loop 1 cpu 7 value 12 initial 7 state 9
state: kdb_main_loop 2 cpu 7 value 12 initial 7 state 9
state: kdb_main_loop 3 cpu 7 value -1001 initial 7 state 9
state: kdb_main_loop 4 cpu 7 value 12 initial 7 state 9
state: kdb 10 cpu 7 value -1001 initial 7 state 9
state: kdb 11 cpu 7 value -1001 initial 7 state 9
state: kdb 12 cpu 7 value 12 initial 7 state 9
state: kdb_ipi 1 cpu 0 value 0 initial 7 state 10
state: kdb 1 cpu 0 value 6 initial -1 state 0
state: kdb 13 cpu 7 value 12 initial -1 state b
state: kdb 14 cpu 7 value -1001 initial -1 state b
state: kdb 15 cpu 7 value -1001 initial -1 state b
state: kdb 16 cpu 7 value -1001 initial -1 state 3
state: kdb 17 cpu 7 value 12 initial -1 state 0
state: kdb 3 cpu 0 value 6 initial -1 state 0
kdb: CPU switch without kdb running, I'm confused
state: kdb_ipi 2 cpu 0 value 0 initial -1 state 0
ed
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#7.
CPU7: Intel P4/Xeon Extended MCE MSRs (12) available
CPU7: Thermal monitoring enabled
CPU7: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05
Total of 8 processors activated (1587.20 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1995.0407 MHz.
..... host bus clock speed is 99.0770 MHz.
checking TSC synchronization across 8 CPUs:
BIOS BUG: CPU#0 improperly initialized, has 27866779 usecs TSC skew! FIXED.
BIOS BUG: CPU#1 improperly initialized, has 27866788 usecs TSC skew! FIXED.
BIOS BUG: CPU#2 improperly initialized, has 27866786 usecs TSC skew! FIXED.
BIOS BUG: CPU#3 improperly initialized, has 27866780 usecs TSC skew! FIXED.
BIOS BUG: CPU#4 improperly initialized, has -27866783 usecs TSC skew! FIXED.
BIOS BUG: CPU#5 improperly initialized, has -27866785 usecs TSC skew! FIXED.
BIOS BUG: CPU#6 improperly initialized, has -27866780 usecs TSC skew! FIXED.
BIOS BUG: CPU#7 improperly initialized, has -27866786 usecs TSC skew! FIXED.
Brought up 8 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd47d, last bus=11
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [VP00] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Root Bridge [VP01] (00:01)
PCI: Probing PCI hardware (bus 01)
ACPI: PCI Root Bridge [VP02] (00:02)
PCI: Probing PCI hardware (bus 02)
ACPI: PCI Root Bridge [VP03] (00:05)
PCI: Probing PCI hardware (bus 05)
ACPI: PCI Root Bridge [VP04] (00:07)
PCI: Probing PCI hardware (bus 07)
ACPI: PCI Root Bridge [VP05] (00:09)
PCI: Probing PCI hardware (bus 09)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fdf90
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x378a, dseg 0xf0000
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 39 (level, low) -> IRQ 39
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:05.2[D] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:05.3[D] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 40 (level, low) -> IRQ 40
ACPI: PCI interrupt 0000:01:03.1[B] -> GSI 41 (level, low) -> IRQ 41
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 42 (level, low) -> IRQ 42
ACPI: PCI interrupt 0000:01:04.1[B] -> GSI 11 (level, low) -> IRQ 11
testing the IO APIC.......................
.................................... done.
vesafb: probe of vesafb0 failed with error -6
apm: BIOS not found.
Starting balanced_irq
audit: initializing netlink socket (disabled)
audit(1088497435.564:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
SELinux: Registering netfilter hooks
Initializing Cryptographic API
PCI: Enabling Via external APIC routing
PCI: Via IRQ fixup for 0000:00:05.2, from 11 to 2
PCI: Via IRQ fixup for 0000:00:05.3, from 11 to 2
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNPBIOS fault.. attempting recovery.
PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
PnPBIOS: You may need to reboot with the "nobiospnp" option to operate stably
PnPBIOS: Check with your vendor for an updated BIOS
PnPBIOS: set_dev_node: unexpected status 0x28
pnp: Failed to activate device 00:03.
serial: probe of 00:03 failed with error -5
Using cfq io scheduler
Floppy drive(s): fd0 is 1.44M
reset set in interrupt, calling c026cc1a
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
Copyright (c) 1999-2004 Intel Corporation.
tg3.c:v3.6 (June 12, 2004)
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 42 (level, low) -> IRQ 42
eth0: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit)
10/100/1000BaseT Ethernet 00:09:6b:e6:01:dd
eth0: HostTXDS[1] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
ACPI: PCI interrupt 0000:01:04.1[B] -> GSI 11 (level, low) -> IRQ 11
eth1: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit)
10/100/1000BaseT Ethernet 00:09:6b:16:01:dd
eth1: HostTXDS[1] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:05.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:05.1
ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:pio, hdd:pio
hda: MATSHITADVD-ROM SR-8177, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
Fusion MPT base driver 3.01.07
Copyright (c) 1999-2004 LSI Logic Corporation
ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 40 (level, low) -> IRQ 40
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
ACPI: PCI interrupt 0000:01:03.1[B] -> GSI 41 (level, low) -> IRQ 41
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator}
Fusion MPT SCSI Host driver 3.01.07
scsi0 : ioc0: LSI53C1030, FwRev=01032316h, Ports=1, MaxQ=222, IRQ=40
Vendor: IBM-ESXS Model: CBR036C31210ESFN Rev: DFQD
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
Vendor: IBM Model: 25P3495a S320 1 Rev: 1
Type: Processor ANSI SCSI revision: 02
scsi1 : ioc1: LSI53C1030, FwRev=01032316h, Ports=1, MaxQ=222, IRQ=41
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 131072 buckets, 1024Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max
trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 228k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED]
Adding 1052216k swap on /dev/sda1. Priority:42 extents:1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
tg3: eth0: Link is up at 10 Mbps, half duplex.
tg3: eth0: Flow control is off for TX and off for RX.
tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is on for TX and on for RX.
ACPI: Power Button (FF) [PWRF]
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03fbfe0(lo)
ACPI: Processor [CP00] (supports C1)
ACPI: Processor [CP01] (supports C1)
ACPI: Processor [CP02] (supports C1)
ACPI: Processor [CP03] (supports C1)
ACPI: Processor [CP04] (supports C1)
ACPI: Processor [CP05] (supports C1)
ACPI: Processor [CP06] (supports C1)
ACPI: Processor [CP07] (supports C1)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device f4eab800(sit0)
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:05.2[D] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:05.2: UHCI Host Controller
parport_pc: Via 686A parallel port disabled in BIOS
PnPBIOS: get_dev_node: function not supported on this system
pnp: Failed to activate device 00:04.
parport_pc: probe of 00:04 failed with error -5
uhci_hcd 0000:00:05.2: irq 18, io base 00001980
uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:05.3[D] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:05.3: UHCI Host Controller
uhci_hcd 0000:00:05.3: irq 18, io base 000019a0
uhci_hcd 0000:00:05.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
---------------------------
Use http://oss.sgi.com/ecartis to modify your settings or to unsubscribe.
