Unfortunately, it isn't possible for the shared networks too. The shared network pretty much derives parameters from the subnet. Or, maybe I should say a subnet derives from the shared network.
Marcin Siodelski ISC On 24.11.2017 18:46, Chaigneau, Nicolas wrote: > Hello, > > > > > > I would like to configure a subnet shared by multiple relays, i.e. that > would be chosen for several “giaddr” values. > > If I’m not mistaken, this was not possible with the basic “subnet4” > configuration prior to 1.3.0 (as parameter “relay” does not support a > list of relays). > > > > Can I achieve that with a shared network in 1.3.0 ? > > > > I’ve read Kea admin guide but I’m not sure this is possible just with > configuration. > > I have the impression that “relay” still can only be one element, either > for the “shared-networks” or for each of its “subnet4” components. > > > > > > > > Regards, > > Nicolas. > > > > > > This message contains information that may be privileged or confidential > and is the property of the Capgemini Group. It is intended only for the > person to whom it is addressed. If you are not the intended recipient, > you are not authorized to read, print, retain, copy, disseminate, > distribute, or use this message or any part thereof. If you receive this > message in error, please notify the sender immediately and delete all > copies of this message. > > > > _______________________________________________ > Kea-users mailing list > [email protected] > https://lists.isc.org/mailman/listinfo/kea-users > _______________________________________________ Kea-users mailing list [email protected] https://lists.isc.org/mailman/listinfo/kea-users
