Thanks Tomek.
I'll have a look at 1.4.0 then. :)
Regards,
Nicolas.
>
> Reviving an old thread, hopefully with some good news.
>
> On 24/11/2017 17:46, Chaigneau, Nicolas wrote:
> > I would like to configure a subnet shared by multiple relays, i.e.
> > that would be chosen for several "giaddr" values.
> >
> > If I'm not mistaken, this was not possible with the basic "subnet4"
> > configuration prior to 1.3.0 (as parameter "relay" does not support a
> > list of relays).
> >
> > Can I achieve that with a shared network in 1.3.0 ?
> No, but you can do it in 1.4.0.
>
> The "relay": { "ip-address": "..." } syntax is now deprecated (but don't
> worry, it will work for couple releases). A new syntax is as follows:
>
> "relay": {
> "ip-addresses": [ "10.0.0.1" ]
> }
>
> This should in principle work for shared networks, but it hasn't been tested
> extensively. User reports more than welcome.
>
> > I've read Kea admin guide but I'm not sure this is possible just with
> > configuration.
> The admin guide for 1.4.0 has its examples updated.
>
> Tomek
>
This message contains information that may be privileged or confidential and is
the property of the Capgemini Group. It is intended only for the person to whom
it is addressed. If you are not the intended recipient, you are not authorized
to read, print, retain, copy, disseminate, distribute, or use this message or
any part thereof. If you receive this message in error, please notify the
sender immediately and delete all copies of this message.
_______________________________________________
Kea-users mailing list
[email protected]
https://lists.isc.org/mailman/listinfo/kea-users
