Kea doesn't like what's in your DHCP packet. Can you upload the network capture somewhere so we can have a look ?
Regards, Nicolas. > > I have a device that is unable to communicate with the Kea server. > According to the manufacturer their lab setup works fine against some Cisco > gear. The error I get is like so: > > 2018-01-09 13:16:15.678 DEBUG [kea-dhcp6.packets/31270] DHCP6_BUFFER_RECEIVED > received buffer from fe80::3e90:66ff:fe4b:cb7c:546 to ff02::1:2:0 over > interface igb2.1600 > 2018-01-09 13:16:15.678 DEBUG [kea-dhcp6.options/31270] DHCP6_BUFFER_UNPACK > parsing buffer received from fe80::3e90:66ff:fe4b:cb7c to ff02::1:2 over > interface igb2.1600 > 2018-01-09 13:16:15.678 DEBUG [kea-dhcp6.bad-packets/31270] > DHCP6_PACKET_DROP_PARSE_FAIL failed to parse packet from > fe80::3e90:66ff:fe4b:cb7c to ff02::1:2, received over interface igb2.1600, > reason: unable to parse the opaque data tuple, the buffer length is 12, but > the length of the tuple in the length field is 3072 > > > I have sent them packet captures, but they say they have found nothing > in them to indicate that this should be a problem. I have tested this client > in a number of different configurations in an attempt to remove any other > influences, and I keep getting the same error. I have also tested against > both Kea 1.2 and 1.3. Other clients/devices work in the same configuration. > > Any ideas? > > --TimH This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message. _______________________________________________ Kea-users mailing list [email protected] https://lists.isc.org/mailman/listinfo/kea-users
