hi to all i am trying for huawei EC321 datacard on my laptop after inserting it dmesg is showing ..
pccard: CardBus card inserted into slot 0 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Enabling device 0000:05:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:05:00.0 to 64 ohci_hcd 0000:05:00.0: OHCI Host Controller ohci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6 ohci_hcd 0000:05:00.0: irq 185, io mem 0x92000000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 1 port detected PCI: Enabling device 0000:05:00.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 16 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:05:00.1 to 64 ohci_hcd 0000:05:00.1: OHCI Host Controller ohci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 7 ohci_hcd 0000:05:00.1: irq 185, io mem 0x92001000 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 1 port detected usb 6-1: new full speed USB device using ohci_hcd and address 2 hub 6-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 6-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 6-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? input: Virtual ThinkFinger Keyboard as /class/input/input4 hub 6-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? usb 6-1: new full speed USB device using ohci_hcd and address 6 usb 6-1: configuration #1 chosen from 1 choice usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for Option 3G dat a card option 6-1:1.0: Option 3G data card converter detected usb 6-1: Option 3G data card converter now attached to ttyUSB0 option 6-1:1.1: Option 3G data card converter detected usb 6-1: Option 3G data card converter now attached to ttyUSB1 usbcore: registered new driver option drivers/usb/serial/option.c: Option Card (PC-Card to) USB to Serial Driver: v0.4 what it means hub 6-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? is it my kernel is not supporting or problem of my hardware.?
