Hi Joerg,
Thanks for your reviewing and great suggestion!
On 09/20/16 at 01:58pm, Joerg Roedel wrote:
> Hi Baoquan,
>
> On Thu, Sep 15, 2016 at 11:03:22PM +0800, Baoquan He wrote:
> > +static int copy_dev_tables(void)
> > +{
> > + u64 entry;
> > + u32 lo, hi, devid;
> > + phys_addr_t old_devtb_phys;
> > + struct dev_table_entry *old_devtb = NULL;
> > + u16 dom_id, dte_v;
> > + struct amd_iommu *iommu;
> > + static int copied;
>
> Please order this by line-length, longer lines first.
Will do.
>
> > + for_each_iommu(iommu) {
> > + if (!translation_pre_enabled(iommu)) {
> > + pr_err("IOMMU:%d is not pre-enabled!/n", iommu->index);
> > + return -1;
> > + }
> > +
> > + if (copied)
> > + continue;
> > +
> > + lo = readl(iommu->mmio_base + MMIO_DEV_TABLE_OFFSET);
> > + hi = readl(iommu->mmio_base + MMIO_DEV_TABLE_OFFSET + 4);
> > + entry = (((u64) hi) << 32) + lo;
> > + old_devtb_phys = entry & PAGE_MASK;
> > + old_devtb = memremap(old_devtb_phys, dev_table_size,
> > MEMREMAP_WB);
> > + if (!old_devtb)
> > + return -1;
> > + for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
> > + amd_iommu_dev_table[devid] = old_devtb[devid];
> > + dom_id = amd_iommu_dev_table[devid].data[1] &
> > DEV_DOMID_MASK;
> > + dte_v = amd_iommu_dev_table[devid].data[0] & DTE_FLAG_V;
> > + if (!dte_v || !dom_id)
> > + continue;
> > + __set_bit(dom_id, amd_iommu_pd_alloc_bitmap);
> > + }
> > + memunmap(old_devtb);
> > + copied = 1;
> > + }
>
> This loop need more refinement and sanity checking code. I suggest using
> two loops and do the sanity checking in the first one. The sanity checks
> should do:
>
> * Check whether all IOMMUs actually use the same device table
> with the same size
>
> * Verify that the size of the old device table is the expected
> size.
Will do.
>
> * Also sanity check the irq-remapping information and remapping
> table sizes.
Will do. Since this need those irq DTE_IRQ_xxxx MACRO which is defined
in amd_iommu.c , I plan to move them into amd_iommu_types.h, and then do
irq-remapping. These can be made in another patch.
>
> If any of these checks fail, just bail out of copying.
>
> What is further needed it some more selection on what is copied from the
> old kernel. There is no need to copy all the GCR3 root-pointer
> information. If a device is set up with guest translations (DTE.GV=1),
> then don't copy that information but move the device over to an empty
> guest-cr3 table and handle the faults in the PPR log (which should just
> answer them with INVALID). After all these PPR faults are recoverable
> for the device and we should not allow the device to change old-kernels
> data when we don't have to.
The current fix is simplest and cleanest. Because the on-flight DMAs
continue transferring data since system crash, including guest
translations, we may not need to care about it and just let it continue
flying a little more time until device is reset. Since you have suggested,
I will try to make another patch for this issue, we can see the effect.
Thanks
Baoquan
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
