@Wayne,
Your email server rejected this email that has a tar ball of kicad
schematic files.
Hope others who can get the attached tar ball try it out with the ERC
and report the findings back here.
--Joe
On 09/13/2015 10:17 PM, Joseph Chen wrote:
@Wayne and @JP,
Could try ERC on this simple schematic file?
Attached, you can find a test schematic file that has an unintended
unmatched local labels, and current kicad ERC does not detect them.
In the test schematic file, there is a mis-spelled local label on the
right hand side. The local labels are constructed with an intention
of using them to serve as ratnets, not just a convenient text.
With this kind of mis-detected errors, the PCB will not have the
intended ratnet at all and thus no copper track will be laid out, and
thus the manufactured boards will be bad.
--Joe
On 09/13/2015 01:00 PM, Wayne Stambaugh wrote:
On 9/13/2015 2:45 PM, jp charras wrote:
Le 13/09/2015 20:11, Wayne Stambaugh a écrit :
On 9/13/2015 1:50 AM, Lorenzo Marcantonio wrote:
On Sat, Sep 12, 2015 at 10:49:59PM -0600, Joseph Chen wrote:
Though you don't approve the change now, I hope you would approve it
sometime later soon, like maybe RC2. I am saying this because I
believe the fix is crucial for KiCAD to be improved towards a
production quality EDA, after I encountered my PCB's near "DEATH"
situation.
I don't think that checking unmatched names is so critical. In fact
*most* of my labels are simply used to... label nets, not to create a
connection. That way during routing I can see the signal which need
particular attention (also it's easier to set netclasses in this way)
A distraction like a mistyped label is akin to connecting a wire
to the
wrong pin (one time I flipped over an amp symbol... lot's of smoke
happened :D); no ERC can save you from that.
The *only* feature useful in the schematic DRC is the 'unconnected
pin'
warning; all the other ones (signal conflicts, power pins and so
on) are
a complete nuisance (at least for mixed signal and analog-heavy
boards).
Even for digital boards a filter inductor on a power pin would give a
missing power warning :P
When a pin is connected to a wire with a label that doesn't go
anywhere,
does the ERC generate an error? It probably should because
technically
this is still an unconnected pin. This is a more sensible then
checking
for unmatched label names for the reasons Lorenzo stated above.
Yes, because unconnected pins without no connect symbol are detected.
Then this should be adequate to detect the problem as it was described
or we have a bug in the ERC code. @Joseph, did you get an ERC error
with your mismatched labels. If so, then the ERC did it's job properly.
I don't think your changes make any improvement and in some cases will
cause issues with net labels.
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
