Le 04/05/2016 à 12:45, [email protected] a écrit : > Hello: > > In the Pad Properties window, Round Rectangle properties, there is the > "Corner size" option. It > shows the calculated "Corner radius" as information. > > Using IPC rules as guidelines, the maximum corner radius must be 25% of the > pad width, with a > maximum of 0.25 mm. If the pad is big enough, a 25% of the pad width yields a > corner radius bigger > than those 0.25 mm, and the % must be adjusted accordingly. For those cases, > can the "Corner radius" > control be editable so it drives the "Corner size" value? > > Iñigo. >
If it is editable, what is the right value: the corner radius, or the % value, when you change the pad size? * You cannot have 2 values for the same parameter. * The % value avoid issues, when changing pad size. This is the reason the pad radius is not editable. -- Jean-Pierre CHARRAS _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
