Le 04/05/2016 à 13:29, [email protected] a écrit : > 2016-05-04 13:03 egunean, jp charras-(e)k idatzi du: >> Le 04/05/2016 à 12:45, [email protected] a écrit : >>> Hello: >>> >>> In the Pad Properties window, Round Rectangle properties, there is the >>> "Corner size" option. It >>> shows the calculated "Corner radius" as information. >>> >>> Using IPC rules as guidelines, the maximum corner radius must be 25% of the >>> pad width, with a >>> maximum of 0.25 mm. If the pad is big enough, a 25% of the pad width yields >>> a corner radius bigger >>> than those 0.25 mm, and the % must be adjusted accordingly. For those >>> cases, can the "Corner radius" >>> control be editable so it drives the "Corner size" value? >>> >>> Iñigo. >>> >> >> If it is editable, what is the right value: the corner radius, or the >> % value, when you change the >> pad size? >> * You cannot have 2 values for the same parameter. >> * The % value avoid issues, when changing pad size. >> This is the reason the pad radius is not editable. > > I don't want two different/non equivalent values for the same > parameter. Can not one change the others value? So if I change % then > corner radius value is updated, if I change corner radius, % is > updated.
You *have* two different/non equivalent values for the same parameter. You missed what I said here: "The % value avoid issues, *when changing pad size*" What is the right value, when you change the pad size? One of these 2 values (absolute radius or % value) become wrong, but what is the value which become wrong? -- Jean-Pierre CHARRAS _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
