Hi! I'll have a look to add vias count to dialog. There's some questions: 1)I don't have too much experience with wxdialogs. There was commit on master, which says: >> remove settings for fg/bg color: the result is unpredictable: was black >> texts on black background on my computer. And now I have all tables with data just in white boxes. Is it how it meant to be, or just some misbehavior on different systems? I use archlinux x64 OS. there's screenshot in attachment
2) Can we use something like _ ( " Height " ) + ":" for translation, not _ ( " Height: " )? As far as I understand, now we will need to have 2 translations, first for "Height" and second for "Height:" but that's basically same word. >Воскресенье, 21 июля 2019, 23:42 +03:00 от Dino Ghilardi ><dino.ghila...@ieee.org>: > >Makes sense. >Instead of a generic "via count" a more complete table similar to the >one generated in the drill report file could be useful, but may be it >can became quite long if a lot of different drill sizes are used (ok, >scrollbars are made to handle that). >Also having "vias", "blind vias" and "microvias" count man make sense >(or at least having something like "microvias used: yes/no"), just to >have in board statistics the information about the need of an advanced >pcb manufacturing process. > > >Cheers, >Dino. > > >On 21/07/19 20:54, Mark Roszko wrote: >> > Since making every hole in the pcb costs time, manufacturers >> calculate the price of the PCB using also that number. >> >> A long time ago, holes cost alot. These days if your manufacturer is >> charging alot per hole, you should run far away. Usually manufactuers >> include 20k-40k holes in the base price per panel before they start >> charging you tiny penny amounts for more in some increments of >> thousands. The CNC machines these days as blazing fast at making the >> holes required and they charge more for the drill bit being worn down >> than the time. >> >> What does actually cost money is via type and size. Blind vias make >> layer stackups a pain in the butt and micro vias needing lasers. >> And also going below some via size can significantly add cost even if >> not at microvia size because it requires different machines with more >> precision and smaller drill bits. >> >> >> If anything I would say to break down the statistics based on via type. >> >> On Sun, Jul 21, 2019 at 1:55 PM Dino Ghilardi < dino.ghila...@ieee.org >> <mailto:dino.ghila...@ieee.org>> wrote: >> >> I just tried the board statistics dialog and looks good, I like it. >> >> A thing I'd like to have to make it better is adding the number of vias >> to the statistics: Since making every hole in the pcb costs time, >> manufacturers calculate the price of the PCB using also that number. >> >> Also the option to save or print a text with the statistics report >> would >> be nice. >> >> >> Cheers, >> Dino. >> > >_______________________________________________ >Mailing list: https://launchpad.net/~kicad-developers >Post to : kicad-developers@lists.launchpad.net >Unsubscribe : https://launchpad.net/~kicad-developers >More help : https://help.launchpad.net/ListHelp -- Alexander Shuklin
_______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : kicad-developers@lists.launchpad.net Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp