Hello when you send production files, you have one GERBER file for each layer. You may give to these files the name and extension you want. You have to specify (in a small TXT file added) to the board manufacturer wich file to use for the different levels in the layer stack.
Jacques --- In [email protected], "apluscw" <[EMAIL PROTECTED]> wrote: > > I see that the intermediate layers are labeled L1, L2, etc. > > For a 6 layer board, are the boards laid out as follows: > > ---component--- > ------L1------- > ------L2------- > ------L3------- > ------L4------- > ----copper----- > > Or is it: > > ---component--- > ------L4------- > ------L3------- > ------L2------- > ------L1------- > ----copper----- > > I would think it would be the former, but the order in the pull down > menu suggests it is the latter. I want to be certain I know which > plane to use as my ground plane. > > Regards, > > a+ >
