On 25 Jan 2008 at 17:30, apluscw wrote: > Hello, Gang, > > I have created gerbers and a drill file from PCB-NEW and I want to > create either a GC-PREVUE or TARGET file from them to send to the good > people over at PCB-POOL. > > In both GC-PREVUE and TARGET, when I import the layers the drill holes > show up greatly offset from the gerber layers and flipped along the > horizontal axis from the orientation of the gerber layers. Under > TARGET, I was very careful to insure the layers were set correctly, > but got the same issue. > > I would bet there is some simple thing I can change to get the gerber > and drill file in sync. If any of the gurus here could advise me the > best step to take to get everything in sync, it would be most appreciated. > > Go KiCad! :-) > > Regards, > > apluscw > In the Plot pop-up, there is a box to check to mirror the drill plot. Does PCB-POOL not take Gerber files?
Dave - WB6DHW <http://wb6dhw.com>
