OK, i think i understand now. Thanks.
But what about ground and power inputs ? Must i make them appeared or not ? (invisible option ?) for example, for a audio filter or an ampli op., there is +Vcc - Vcc. thses pins must be drawn for each parts or only the first one ? thanks --- In [email protected], "rohchar" <[EMAIL PROTECTED]> wrote: > > Hi, > > using a quad nand 74hc00 per ex., you have one component with > 4 gates. Adding an 74hc00, you always get the first gate (pins 1, > 2 & 3). So, you need to select which unit you want to use > (Edite Composant => Unite => Unit 1, 2, 3 or 4). > > When you create a new component, you have to specify the number > of parts or units. Default is 1. > > You can also use this feature to split a big component. > You can see here a xc2v3000 fpga (one part) and a xc2v3000 with > 9 parts : > kicad.rohrbacher.net/temp > > regards, > Charles. > > --- In [email protected], "sroux93" <sroux93@> wrote: > > > > Someone can explain to me what are component with different parts > > (eeschema program --> when you create a new component from a > > existing one, in the properties, you can select number of parts... > > but but means this function ???) > > > > I am french if you want to answer in french. And i read english > > > > Thanks > > >
