Jean=Pierre, I've emailed you the board file.
Thanks, Nick. --- In kicad-users@yahoogroups.com, jean-pierre charras <[EMAIL PROTECTED]> wrote: > > Nick Oatley a écrit : > > > > I updated PCBnew from version 2007-11-29-c to version 20080715. I've > > now done some minor tweaks to a design done in the older version, and > > I've noticed what seems to be a significant change in the way the > > oblong-shaped (routed) component holes appear in the drill file. I'm > > worried about this as I'm just about to place an order for 100 pcbs, > > and I don't want them to all be wrong! > > > > The relevant bits of the 2007-11-29-c version drill file looked like this: > > T1C0.800 > > T3C1.199 > > > > T1 > > X191.389Y-83. 439G85X194. 437Y-83.439 > > G05 > > X196.215Y-89. 789G85X196. 215Y-86.741 > > G05 > > T3 > > X189.992Y-89. 952G85X189. 992Y-86.578 > > G05 > > > > and the 20080715 drill file looks like this: > > > > T1C0.800 > > T5C3.851 > > T7C4.572 > > > > T1 > > X191.389Y-83. 439G85X194. 437Y-83.439 > > G05 > > T5 > > X196.215Y-89. 789G85X196. 215Y-86.741 > > G05 > > T7 > > X189.992Y-89. 952G85X189. 992Y-86.578 > > G05 > > > > so as far as I can see, the lines containing the routed hole > > information are the same (the holes haven't moved), but the drill size > > has changed substantially. > > > > Does this matter? > > > > Can you send me your board file ? > > -- > > Jean-Pierre CHARRAS > > Maître de conférences > Directeur d'études 2ieme année. > Génie Electrique et Informatique Industrielle 2 > Institut Universitaire de Technologie 1 de Grenoble > BP 67, 38402 St Martin d'Heres Cedex > > Recherche : > GIPSA-LIS - INPG > 46, Avenue Félix Viallet > 38031 Grenoble cedex >
