Great, that works! Thanks, David!
--- In [email protected], "yajeed2000" <[EMAIL PROTECTED]> wrote: > > --- In [email protected], "tom_iphi" <iphi@> wrote: > > > > Hi, > > > > I encounter the following problem: > > In my schematic, I use the standard DB9 connector to provide power and > > GND. In the KiCAD lib, the DB9 connector is defined with 9 passive pins. > > > > Thus I get two ERC errors: > > > > ERC: Warning Pin power_in not driven (Net 7) (X= 5,900 inches, Y= 3,200 > > inches > > > > , one for GND and one for VCC. > > > > Do I need a special connector edition for each application or is there > > another way to tell eeschema, that GND and VCC are actually driven > > through the DB9 connector? > > > > Thanks, Tom > > > Hi, > Just add a 'power flag' symbol to both GND and VCC. This should cure > the problem. > > David. >
