--- In [email protected], "tom_iphi" <[EMAIL PROTECTED]> wrote: > > Hi, > > I encounter the following problem: > In my schematic, I use the standard DB9 connector to provide power and > GND. In the KiCAD lib, the DB9 connector is defined with 9 passive pins. > > Thus I get two ERC errors: > > ERC: Warning Pin power_in not driven (Net 7) (X= 5,900 inches, Y= 3,200 > inches > > , one for GND and one for VCC. > > Do I need a special connector edition for each application or is there > another way to tell eeschema, that GND and VCC are actually driven > through the DB9 connector? > > Thanks, Tom > Hi, Just add a 'power flag' symbol to both GND and VCC. This should cure the problem.
David.
