alfonsw escribió: > > --- In [email protected] > <mailto:kicad-users%40yahoogroups.com>, Mauro Antivero > <[EMAIL PROTECTED]> wrote: > > > > Is the freerouter capable to make bridges when I use the autorouter > > feature? In manual route when I need a bridge, simply insert a via, used > > the other layer as a bridge, and then come back with another via. > > > > I wonder if there any posibility to do this automaticaly when the > > autoroute feature is used. > > > > Thanks a lot and sorry for my poor english. > > > > Choose Parameter | Autoroute in the pulldown menu of the Freerouter. > Then push "Detail Parameter" at the end of the Autoroute Parameter > sheet, that pops up. > In the Detail Autoroute Parameter sheet change the trace costs on the > bridge layer to a large value for both directions. > Eventually change also the via costs to a higher value. > Now start the autorouter. > Only if the autorouter is not able to route a connection completely on > the trace layer, he will now insert a very short track with a via at > each end point on the bridge layer. > > Alfons > > Thanks a lot. I'll try this and comment later.
Thanks again! Mauro.
