Hi, I have just finished one board and unfortunately when going to plot I have found that ploting doesn't work at all. Choosing gerber only opens a small green dot , PS files also are not containing correct informations. Files are around 20KB on disk, and I have opened them with an text editor and it seems that all coordinates inside of them are reffering to an 82670 value (example below).
I really need some help because I need this board to be made. On the other hand, using printing , it seems to "Recognise" the board and it seems to print the board. Thanks. Daniel ... 0 82670 0 82670 line 0 82670 0 82670 line 0 82670 0 82670 line 0 82670 0 82670 line 0 82670 0 82670 line 0 82670 0 82670 line 0 82670 0 82670 line 0 82670 0 82670 line 0 82670 0 82670 line 0 82670 0 82670 line 0 82670 0 82670 line 0 82670 0 82670 line ...