A similar issue was discussed on the Brazilian list... It was Renies's suggestion to check if you a good board edge. It's something to do with Gerber's limit that default to the first track in the file.
As this is a recurrent problem, maybe it could be addressed in the Gerber genetation code... Alain dandumit escreveu: > Hi, > I have just finished one board and unfortunately when going to plot I > have found that ploting doesn't work at all. Choosing gerber only > opens a small green dot , PS files also are not containing correct > informations. > Files are around 20KB on disk, and I have opened them with an text > editor and it seems that all coordinates inside of them are reffering > to an 82670 value (example below). > > I really need some help because I need this board to be made. > > On the other hand, using printing , it seems to "Recognise" the board > and it seems to print the board. > > > Thanks. > Daniel > > ... > 0 82670 0 82670 line > 0 82670 0 82670 line > 0 82670 0 82670 line > 0 82670 0 82670 line > 0 82670 0 82670 line > 0 82670 0 82670 line > 0 82670 0 82670 line > 0 82670 0 82670 line > 0 82670 0 82670 line > 0 82670 0 82670 line > 0 82670 0 82670 line > 0 82670 0 82670 line > ... > > > ------------------------------------ > > Please read the Kicad FAQ in the group files section before posting your > question. > Please post your bug reports here. They will be picked up by the creator of > Kicad. > Please visit http://www.kicadlib.org for details of how to contribute your > symbols/modules to the kicad library. > For building Kicad from source and other development questions visit the > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups > Links > > > > >
