mikebeauchampdotcom a écrit : > > I submitted my first board with Kicad to BatchPCB and it got rejected > because traces were below their 8 mil minimum trace width. > > They (very conveniently) sent me an image back of the board with the > error highlighted. The part that failed was a Fill area. I changed the > fill's grid to be .010 and tried again. The problem was still that the > actual width's of the tracks that are part of the thermal pads were > still below 8 mils. > > The Fill was only a small section (under a crystal) so I changed the > pads to just be connected instead of thermal pads, but I'm pretty > disappointed that the thermal pad's little radial connectors are so > damn narrow and seemingly unable to be changed. > > Maybe there's something I'm missing? > In last stable version and all previous versions thermal pad's little radial connectors are drawn with the current track width. So: Select a suitable track width and refill zones.
-- Jean-Pierre CHARRAS Maître de conférences Directeur d'études 2ieme année. Génie Electrique et Informatique Industrielle 2 Institut Universitaire de Technologie 1 de Grenoble BP 67, 38402 St Martin d'Heres Cedex Recherche : GIPSA-LIS - INPG Rue de la Houille Blanche 38400 Saint Martin d'Heres
