I submitted my first board with Kicad to BatchPCB and it got rejected because traces were below their 8 mil minimum trace width.
They (very conveniently) sent me an image back of the board with the error highlighted. The part that failed was a Fill area. I changed the fill's grid to be .010 and tried again. The problem was still that the actual width's of the tracks that are part of the thermal pads were still below 8 mils. The Fill was only a small section (under a crystal) so I changed the pads to just be connected instead of thermal pads, but I'm pretty disappointed that the thermal pad's little radial connectors are so damn narrow and seemingly unable to be changed. Maybe there's something I'm missing? Mike
