You don't need to go to all that trouble. There's a button on the left side that disables track autodeletion. Click the button before placing redundant tracks, and then click it again when you're done to re-enable it.
Dan --- In [email protected], Robert <birmingham_spi...@...> wrote: > > Before creating the second set of tracks, Select Preferences...General, > and then unselect Tracks Auto Del. > > > On 08/03/2010 13:50, bbt5001 wrote: > > I made a relatively simple board consisting of two through-hole connectors > > and one or two surface mount devices. Since I had double-sided available I > > thought I'd use it to provide extra current capability, so after making my > > point-to-point connections on one side (satisfying the DRC with no unrouted > > nets) I switched to the other layer and repeated the connections. But when > > I generated the gerber files only the traces for one side appeared. > > Everything else was correct: all the through holes had both copper and > > component layer annuli, and the one SMD component had the correct component > > layer traces. But the additional (redundant) traces on the copper side > > were removed. > > > > Is this an intentional feature of the program? Is there a way to disable it?
