--- In kicad-users@yahoogroups.com, "Seroxatmad" <seroxat...@...> wrote: > > > > --- In kicad-users@yahoogroups.com, Bernd Wiebus <bernd.wiebus@> wrote: > > > > Hello John. > > > > > Am i right in thinking any text such as board name revision etc will go > > > on silkscreen front and silkscreen back (mirrored)? > > > > No. Text can also be put to a copper layer. This has the advantage, that > > you always have this information on the board, even if you try to save > > money by not using a silkscreen print, or if a vendor forgets it. > > > > But at least, there has to be room enough at your board to put text > > information on the cooper layers. Isolating distance is an issue...... > > > > With best regards: Bernd Wiebus alias dl1eic > > > > http://www.dl0dg.de > > > Thanks for the reply. > > Just created my first of two boards for my project in kicad. Looks cool in 3D > even...apart from needing to learn wings3d now for some of the components! > > May send it off for manufacture before the second board is finished (42 year > old excited kid here lol). > > Has any one had experience of www.elektorpcbservice.com which seems to be > eurocircuits.com > > Cheers > > John (UK) > Hi John,
I don't have any experience of Elektor boards, but I have used Eurocircuits for all my PCBs for some years now, and would recommend them to anyone. They have also introduced additional services recently, so should cater for almost every requirement, except possibly extreme high-end complexity/high volume - though, maybe they can do that too through Europrint, their sister/parent company? Regards, Tony
