On Sat, January 13, 2007 5:58 pm, Gus Wirth wrote: > Lan Barnes wrote: >> Onward! >> >> I bought the Gyration wireless keyboard/mouse for the Myth box: >> >> http://www.gyration.com/en-US/ProductDetail.html?modelnum=GC1105CKM&accshow=3 >> >> According to Bruce Perens, it should work: >> >> http://perens.com/FreeSoftware/gyration.html >> >> The module Perens points to is loading: >> >> [EMAIL PROTECTED] sysconfig]# lsmod |grep stap_pci >> hostap_pci 61813 0 >> hostap 113609 1 hostap_pci > > Huh? This has nothing to do with USB, it's for a wireless card. It also > isn't even mentioned on the web page you reference. You are confused. >
Well, the radio reciever for the kb is USB, which is why I included the tail -f below (which says "USB"). So perhaps I should have mentioned that. >> Here is tail -f as I put in the USB receiver: >> >> Jan 13 16:21:37 xena kernel: usb 2-2: new low speed USB device using >> uhci_hcd and address 7 >> Jan 13 16:21:37 xena kernel: usb 2-2: configuration #1 chosen from 1 >> choice >> Jan 13 16:21:37 xena kernel: input: Gyration Gyration RF Technology >> Receiver as /class/input/input8 >> Jan 13 16:21:37 xena kernel: input,hiddev96: USB HID v1.10 Keyboard >> [Gyration Gyration RF Technology Receiver] on usb-0000:00:10.1-2 >> Jan 13 16:21:37 xena kernel: input: Gyration Gyration RF Technology >> Receiver as /class/input/input9 >> Jan 13 16:21:37 xena kernel: input,hiddev97: USB HID v1.20 Mouse >> [Gyration >> Gyration RF Technology Receiver] on usb-0000:00:10.1-2 >> >> Now to my reading, the first line of this which says it uses uhci_hcd is >> the suspect one. But I don't know if I'm right, and I don't know what to >> do about it. >> >> I am testing at the CLI, but have this for later: >> >> http://www.linuxjournal.com/article/7361 >> >> Gyration's tech support is drain bed on Linux. > > You don't state what the problem is. The system detected a new USB > device, it figured out what it was, and it told you so. > > The keyboard is available as /class/input/input8 and the mouse is > available as /class/input/input9. > > So this is good, no? Now (remembering who you're talking to -- *very small words*), how do I tell my system to get its keystrokes from /class/input/input8? Something in /etc/sysconfig? -- Lan Barnes SCM Analyst Linux Guy Tcl/Tk Enthusiast Biodiesel Brewer -- [email protected] http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list
