I'm having a problem writing DVD iso images to
DVD-R media. I'm looking for some input on what
I am doing wrong and some tips on what to do
next. Here is what I have going on so far...
dmesg says
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive,
2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
KInfoCenter says:
Can Write DVD-R YES
Can Write DVD-RAM YES
I read this:
http://osdir.com/ml/debian.knoppix/2004-06/msg00067.html
to get this:
growisofs -dvd-compat -Z
/dev/hdc=KNOPPIX_V5.1.1DVD-2007-01-04-EN.iso
After making a couple coasters I searched and
found tkDVD
(http://regis.damongeot.free.fr/tkdvd/) and it
shows you the CLI it builds. In this case
specifically for burning a DVD images it creates
this:
growisofs -dvd-compat -use-the-force-luke=tty -Z
/dev/dvd=KNOPPIX_V5.1.1DVD-2007-01-04-EN.iso
BTW I got "KNOPPIX_V5.1.1DVD-2007-01-04-EN.iso"
via bittorrent using Azureus (twice)
Both the CLI and tkDVD produce output similar to
the following during the burn process...
growisofs -dvd-compat -Z
/dev/hdc=KNOPPIX_V5.1.1DVD-2007-01-04-EN.iso
Executing 'builtin_dd
if=KNOPPIX_V5.1.1DVD-2007-01-04-EN.iso
of=/dev/hdc obs=32k seek=0'
/dev/hdc: "Current Write Speed" is 8.2x1352KBps.
0/4232019968 ( 0.0%) @0x, remaining
??:?? RBU 100.0% UBU 0.0%
0/4232019968 ( 0.0%) @0x, remaining
??:?? RBU 100.0% UBU 0.0%
0/4232019968 ( 0.0%) @0x, remaining
??:?? RBU 100.0% UBU 0.0%
0/4232019968 ( 0.0%) @0x, remaining
??:?? RBU 100.0% UBU 0.0%
0/4232019968 ( 0.0%) @0x, remaining
??:?? RBU 100.0% UBU 0.0%
11272192/4232019968 ( 0.3%) @2.4x, remaining
131:03 RBU 100.0% UBU 2.9%
27295744/4232019968 ( 0.6%) @3.5x, remaining
64:11 RBU 99.2% UBU 100.0%
43417600/4232019968 ( 1.0%) @3.5x, remaining
45:01 RBU 100.0% UBU 100.0%
59670528/4232019968 ( 1.4%) @3.5x, remaining
36:07 RBU 100.0% UBU 100.0%
76054528/4232019968 ( 1.8%) @3.6x, remaining
31:52 RBU 100.0% UBU 97.1%
92569600/4232019968 ( 2.2%) @3.6x, remaining
28:19 RBU 100.0% UBU 100.0%
109215744/4232019968 ( 2.6%) @3.6x, remaining
25:47 RBU 100.0% UBU 100.0%
...
4180213760/4232019968 (98.8%) @3.0x, remaining
0:07 RBU 100.0% UBU 100.0%
4194172928/4232019968 (99.1%) @3.0x, remaining
0:05 RBU 99.8% UBU 100.0%
4208132096/4232019968 (99.4%) @3.0x, remaining
0:03 RBU 99.8% UBU 100.0%
4222058496/4232019968 (99.8%) @3.0x, remaining
0:01 RBU 59.4% UBU 100.0%
builtin_dd: 2066416*2KB out @ average 5.1x1352KBps
/dev/hdc: flushing cache
/dev/hdc: updating RMA
/dev/hdc: closing disc
The system that does the burn "sees" the blank
DVD-R media before the burn and then doesn't
recognize the media after the burn. The system
dedicated to booting from Knoppix using Knoppix
v5.11 on CD-ROM doesn't boot from the DVD-R at
all (tested on 2 different systems).
I'm stumped...
TIA!
rb(no water stains around here)w
--
[email protected]
http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list
