Good luck. I asked a similar question over a week ago and haven't had a reply, not even ridicule.
<here comes lots of ridicule ... but probably no help> On Sat, October 20, 2007 11:41 am, rbw wrote: > I'm having a problem writing DVD iso images to > DVD-R media. I'm looking for some input on what > I am doing wrong and some tips on what to do > next. Here is what I have going on so far... > > dmesg says > hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, > 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > > KInfoCenter says: > Can Write DVD-R YES > Can Write DVD-RAM YES > > I read this: > http://osdir.com/ml/debian.knoppix/2004-06/msg00067.html > to get this: > growisofs -dvd-compat -Z > /dev/hdc=KNOPPIX_V5.1.1DVD-2007-01-04-EN.iso > > After making a couple coasters I searched and > found tkDVD > (http://regis.damongeot.free.fr/tkdvd/) and it > shows you the CLI it builds. In this case > specifically for burning a DVD images it creates > this: > growisofs -dvd-compat -use-the-force-luke=tty -Z > /dev/dvd=KNOPPIX_V5.1.1DVD-2007-01-04-EN.iso > > BTW I got "KNOPPIX_V5.1.1DVD-2007-01-04-EN.iso" > via bittorrent using Azureus (twice) > > Both the CLI and tkDVD produce output similar to > the following during the burn process... > > growisofs -dvd-compat -Z > /dev/hdc=KNOPPIX_V5.1.1DVD-2007-01-04-EN.iso > Executing 'builtin_dd > if=KNOPPIX_V5.1.1DVD-2007-01-04-EN.iso > of=/dev/hdc obs=32k seek=0' > /dev/hdc: "Current Write Speed" is 8.2x1352KBps. > 0/4232019968 ( 0.0%) @0x, remaining > ??:?? RBU 100.0% UBU 0.0% > 0/4232019968 ( 0.0%) @0x, remaining > ??:?? RBU 100.0% UBU 0.0% > 0/4232019968 ( 0.0%) @0x, remaining > ??:?? RBU 100.0% UBU 0.0% > 0/4232019968 ( 0.0%) @0x, remaining > ??:?? RBU 100.0% UBU 0.0% > 0/4232019968 ( 0.0%) @0x, remaining > ??:?? RBU 100.0% UBU 0.0% > 11272192/4232019968 ( 0.3%) @2.4x, remaining > 131:03 RBU 100.0% UBU 2.9% > 27295744/4232019968 ( 0.6%) @3.5x, remaining > 64:11 RBU 99.2% UBU 100.0% > 43417600/4232019968 ( 1.0%) @3.5x, remaining > 45:01 RBU 100.0% UBU 100.0% > 59670528/4232019968 ( 1.4%) @3.5x, remaining > 36:07 RBU 100.0% UBU 100.0% > 76054528/4232019968 ( 1.8%) @3.6x, remaining > 31:52 RBU 100.0% UBU 97.1% > 92569600/4232019968 ( 2.2%) @3.6x, remaining > 28:19 RBU 100.0% UBU 100.0% > 109215744/4232019968 ( 2.6%) @3.6x, remaining > 25:47 RBU 100.0% UBU 100.0% > ... > 4180213760/4232019968 (98.8%) @3.0x, remaining > 0:07 RBU 100.0% UBU 100.0% > 4194172928/4232019968 (99.1%) @3.0x, remaining > 0:05 RBU 99.8% UBU 100.0% > 4208132096/4232019968 (99.4%) @3.0x, remaining > 0:03 RBU 99.8% UBU 100.0% > 4222058496/4232019968 (99.8%) @3.0x, remaining > 0:01 RBU 59.4% UBU 100.0% > builtin_dd: 2066416*2KB out @ average 5.1x1352KBps > /dev/hdc: flushing cache > /dev/hdc: updating RMA > /dev/hdc: closing disc > > The system that does the burn "sees" the blank > DVD-R media before the burn and then doesn't > recognize the media after the burn. The system > dedicated to booting from Knoppix using Knoppix > v5.11 on CD-ROM doesn't boot from the DVD-R at > all (tested on 2 different systems). > > I'm stumped... > > TIA! > rb(no water stains around here)w > > > -- > [email protected] > http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list > -- Lan Barnes SCM Analyst Linux Guy Tcl/Tk Enthusiast Biodiesel Brewer -- [email protected] http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list
