[EMAIL PROTECTED] fsck -rC /dev/hda3 fsck 1.38-WIP (09-May-2005) reiserfsck 3.6.19 (2003 www.namesys.com)
************************************************************* ** If you are using the latest reiserfsprogs and it fails ** ** please email bug reports to [EMAIL PROTECTED], ** ** providing as much information as possible -- your ** ** hardware, kernel, patches, settings, all reiserfsck ** ** messages (including version), the reiserfsck logfile, ** ** check the syslog file for any related information. ** ** If you would like advice on using this program, support ** ** is available for $25 at www.namesys.com/support.html. ** ************************************************************* Will read-only check consistency of the filesystem on /dev/hda3 Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes The problem has occurred looks like a hardware problem. If you have bad blocks, we advise you to get a new hard drive, because once you get one bad block that the disk drive internals cannot hide from your sight,the chances of getting more are generally said to become much higher (precise statistics are unknown to us), and this disk drive is probably not expensive enough for you to you to risk your time and data on it. If you don't want to follow that follow that advice then if you have just a few bad blocks, try writing to the bad blocks and see if the drive remaps the bad blocks (that means it takes a block it has in reserve and allocates it for use for of that block number). If it cannot remap the block, use badblock option (-B) with reiserfs utils to handle this block correctly. bread: Cannot read the block (8210): (Input/output error). Warning... fsck.reiserfs for device /dev/hda3 exited with signal 6. [EMAIL PROTECTED] -- [email protected] http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list
