This is what I used. http://krbuilder.org/MakingTailWheelSpring/index.html
The first attempt was a bit too springy, so I made it twice as thick on the part from the fuselage attach point to the wheel attach. See N64KR at http://KRBuilder.org - Then click on the pics Best Firwwall Forward at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Daniel R. Heath - Lexington, SC -----Original Message----- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Tom Sent: Saturday, November 16, 2013 3:24 PM To: KRnet Subject: KR> Tailwheel springs? Where do all get your tail wheel spring? I have a B&K 4X140 that has recessed areas top and bottom in the mount. bottom is one and one half wide, and top is one and one quarter inch wide. I has holes for two quarter inch bolts, the mount is at approx. 45 degree angle. _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
