I came across this website long time ago on how to finish your composite surfaces for painting. http://curedcomposites.com/finish.html It talks about applying micro to the whole surface then sand down with different sanding board. One thing that I would change is with the micro. After mixing a vary stiff batch. Thin it down with MEK. Than add some more micro. Then thin that down to a consistency of leveling compound. Poured on the surface and help it level out. it takes longer for it to cure but after it does sand it down. You come out with a perfectly flat surface or whatever kind of surface you want. This is the way I did it on E4-B's in the Air Force.
Paul Visk Belleville Il 618 406 4705 Sent from my HTC on the Now Network from Sprint! ----- Reply message ----- From: "Lawrence Bell via KRnet" <krnet at list.krnet.org> List-Post: [email protected] Date: Tue, Nov 11, 2014 10:48 am Subject: KR> Website update To: "stefkr2 at kpnmail.nl" <stefkr2 at kpnmail.nl>, "KRnet" <krnet at list.krnet.org> Steph and Dad, That's the first blow by blow I've seen on doing the finish, thank you. I'm not sure about the auto filler, sounds heavy, but you did a beautiful job. The best step I noticed was a complete cover of mocro mixture. I have been doing it spot by spot and plan to change to your system. Thanks again, Larry Bell On Tue, Nov 11, 2014 at 8:07 AM, stefkr2--- via KRnet <krnet at list.krnet.org> wrote: > Hi kr-friends > We did a update to our website. > Now we need to finish everything inside so we can do a weight And balance, > then the engine. > Stef > > > -- > Steph and his dad are building the KR-2S see > http://www.masttotaalconcept.nl/kr2 > > > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
