Thanks, Paul, I talked to you about it at the gathering but it helps to have the pictures and instructions, Larry Bell
On Tue, Nov 11, 2014 at 4:02 PM, ppaulvsk at aol.com <krnet at list.krnet.org> wrote: > I came across this website long time ago on how to finish your composite > surfaces for painting. http://curedcomposites.com/finish.html It > talks about applying micro to the whole surface then sand down with > different sanding board. > One thing that I would change is with the micro. After mixing a vary > stiff batch. Thin it down with MEK. Than add some more micro. Then thin > that down to a consistency of leveling compound. Poured on the surface and > help it level out. it takes longer for it to cure but after it does sand it > down. You come out with a perfectly flat surface or whatever kind of > surface you want. This is the way I did it on E4-B's in the Air Force. > > Paul Visk > Belleville Il > 618 406 4705 > > Sent from my HTC on the Now Network from Sprint! > > ----- Reply message ----- > From: "Lawrence Bell via KRnet" <krnet at list.krnet.org> > Date: Tue, Nov 11, 2014 10:48 am > Subject: KR> Website update > To: "stefkr2 at kpnmail.nl" <stefkr2 at kpnmail.nl>, "KRnet" < > krnet at list.krnet.org> > > Steph and Dad, > That's the first blow by blow I've seen on doing the finish, thank > you. I'm not sure about the auto filler, sounds heavy, but you did a > beautiful job. The best step I noticed was a complete cover of mocro > mixture. I have been doing it spot by spot and plan to change to your > system. > Thanks again, Larry Bell > > On Tue, Nov 11, 2014 at 8:07 AM, stefkr2--- via KRnet < > krnet at list.krnet.org> > wrote: > > > Hi kr-friends > > We did a update to our website. > > Now we need to finish everything inside so we can do a weight And > balance, > > then the engine. > > Stef > > > > > > -- > > Steph and his dad are building the KR-2S see > > http://www.masttotaalconcept.nl/kr2 > > > > > > > > > > _______________________________________________ > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > > please see other KRnet info at http://www.krnet.org/info.html > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to > change > > options > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options >
