The plans version is 1/8", or 3.175mm for you Aussie types. As you are probably aware, the plans version does not stick very far aft and it is fairly wide and it is a lot more likely to bend if you extend it. I extended mine some and used two pieces of 1/8" that I think were only like an inch and a half wide to fit in a Matco tailwheel. Mine were spring steel and were heat treated and still bent.
-------- Original Message -------- Subject: KR> Tail Wheel spring From: Phillip Matheson via KRnet <krnet at list.krnet.org> List-Post: [email protected] Date: Wed, November 19, 2014 8:40 pm To: "KRnet" <krnet at list.krnet.org> Can someone please let me know the thickness of the tail wheel spring, I need to find a light leaf spring to cut and make one.. Phil Matheson _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
