I am talking about the drive Steve had many years ago.  I was a cast "bullet" 
extension housing with a prop extension shaft, anti-vibration link, and thrust 
bearing.  It was not a PSRU.

---- Mike T via KRnet <krnet at list.krnet.org> wrote:
> "He said he stopped marketing these because they didn't sell well do
> to the weight and cost."
>
> Which one are you talking about? According to the Great Plains
> website, the flywheel drive is the lightest one and the cheapest one.
> It does have some oddities, however. There's a secondary ignition run
> off a special oil pump rather than the distributor housing, and
> several other components are different because the engine is turned
> around from the normal VW.
>
> According to the website, this engine was first used in the bk1.3
> single-seater. That design has the cylinders out in the breeze, but
> the cowling is fairly narrow in front. Here's a 2014 Experimenter
> article with a closeup of the engine
> http://experimenter.epubxp.com/i/287214-april-2014/11 The cowling
> has a huge gap on the underside for cooling, but otherwise it seems
> fairly tight, and it looks like a KR cowling could be fitted around
> that engine. The flywheel doesn't look like as much of a problem as
> the starter (which seems to be sticking way up there).
>
> Another possible problem is using a magneto. A year or two ago, I
> noticed they didn't list a magneto as an accessory, and emailed Steve
> about it. He confirmed they don't have a way to use one. Of course,
> that doesn't mean you can't use one, but that you'd have to design
> your own way to connect it (which is basically what Ken Rand did in
> the KR plans).
>
> Mike Taglieri
>
> On Mon, Nov 23, 2015 at 8:13 AM, Michael Ladigo via KRnet
> <krnet at list.krnet.org> wrote:
> > Ron,
> > Yes, I spoke with Steve a year or two ago. He said he stopped marketing 
> > these because they didn't sell well do to the weight and cost. I always 
> > thought this was the most trick drive, yet. If you ever decide to part with 
> > yours, I'd be interested.
> > Mike Ladigo
> >
> > _______________________________________________
> > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> > please see other KRnet info at http://www.krnet.org/info.html
> > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
> > options
>
> _______________________________________________
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
> options

Reply via email to