You might be able to sand it out if it's that small. Glue down strips of sandpaper to the length of the,aileron ?onto your flat table with 3M spray adhesive( I love that,stuff) and run the aileron spar over the top of it until the bow is gone.?
Paul ViskBelleville Il618-406-4705 -------- Original message --------From: Pete Klapp via KRnet <krnet at list.krnet.org> Date: 1/6/2016 11:02 AM (GMT-06:00) To: krnet at list.krnet.org Cc: Pete Klapp <pkengr at hotmail.com> Subject: Re: KR> Aileron spar The holes aren't misaligned, but there is about a 1/32+ bow in the aileron spar that is causing the bind. Pete > Date: Wed, 6 Jan 2016 03:30:13 -0600 > To: krnet at list.krnet.org > Subject: Re: KR> Aileron spar > From: krnet at list.krnet.org > CC: ppaulvsk at aol.com > > Why is the hinge binding?? Holes misaligned and putting the hinge in a bend. > I would just redrill the hinge If so. Remember, keep it simple. > > > Paul Visk Belleville Il 618-406-4705 > > > >? > Netters > Have some difficulty with the aileron spars that I have floxed into the wing > (Diehl RAF-48 skins). Thought I had them held straight when I glued them in, > but when I screw the hinge in place, it's in a bind, not real bad, but not as > free as I think it should be. Thinking of re-doing the spars and using rod > ends like the Dr. Dean > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options ?? ? _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
