Someone correct me if I am wrong on this, it has been a little while and my memory is not 100% clear.
The main spar fittings are exactly the same for both the 2 and the 2S. On the aft spar of the 2 the fittings should all the same, but on the 2S the spar cants forward a few degrees some of the aft fittings are a bit longer with a slight difference in spacing from the attach bolt hole to the holes that go through the spar. They also have a slight bend to them. So basically if you bought a set of 2S fittings to use on a 2 or vice versa you would need to remake either four or eight of the aft fittings, can't remember if there are four oddballs or eight. -------- Original Message -------- Subject: KR> wing attach fittings. From: Wayne via KRnet <krnet at list.krnet.org> List-Post: krnet@list.krnet.org Date: Mon, February 01, 2016 8:35 am To: krnet at list.krnet.org Cc: Wayne <wdelislesr at carolina.rr.com> Hey Brian, I got you started with the first bid. Question, Is there a difference between the KR2 WAF's and those for the KR2s? -- Wayne DeLisle Sr. _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
