> When I drilled up my WAF'S the tips of the forward spars were in
> different
> places. I need to bring the right wing tip forward and the left wing
> tip aft. I
> was thinking about taking the bolts (AN6's) out of the upper and
> lower attach
> fittings on the rear face of the forward spar, moving them to where
> the should
> be and, reaming the holes up to a 7/16 (AN7), which should clean up
> any
> mismatch. This would put me below the 2D minimum for edge distance
> by .072 in.
>
> Chris Theroux
> Gilbert, AZ
Chris,
When I built my wings this fall I had one hole that didn't line
up perfect. I ordered in some grade 8-- 10 mm bolts and reamed to fix the
hole. It only changed it by a few thousandth's. Now I have one different
but clearly marked. This could be an option as it does not take much to
move the tip of the spar around instead of risking the loss of edge metal
Joe Horton
[email protected]
