If you have a compressor, blow the hell out of the sanded surface and that should remove any lose particles.
Bob Stone, Harker Heights, Tx [email protected] -------Original Message------- From: KRnet List-Post: [email protected] Date: 07/03/04 12:02:30 To: [email protected] Subject: Re: KR> outboard spar taper Vacuum the sanded portion, Virg On Fri, 2 Jul 2004 14:58:26 -0500 "Pat Driscoll" <[email protected]> writes: > Stephen' > The problem with sanding is that the wood dust gets into the > grain and the glue sticks to the dust more so than the hard wood. > This is more important on end grain gluing than on a flat spar > length. > Pat Driscoll > [email protected] > Saint Paul, MN > > > ------ http://USFamily.Net/info - Unlimited Internet - From > $8.99/mo! ------ > _______________________________________ > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html > > Virgil N. Salisbury - AMSOIL www.lubedealer.com/salisbury Miami ,Fl _______________________________________ to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html
