Long piano hinges on the turtle deck, Virg On Sun, 8 May 2005 17:41:00 +0200 Serge VIDAL <[email protected]> writes: > I will have to make one or several inspection hatches on my tail > section, > for the following reasons: > 1 - I need to replace the elevator cables; > 2 - I need to remove the tail wheel spring; > 3 - I need to be able to inspect the rudder and elevator hinges > nuts. > > The more I think of it, the more I end up thinking that one large > hole > each side will serve my purpose better than three or four tiny ones. > If I > make these holes under the horizontal stabilizer, I will probably be > able > to do everything except replacing the top elevator cable. > > Has anybody been there, done that already? > How big can I make that hole? > Where should I drill the hole? > I was thinking of maybe 120mm (4.75") opening, right in the middle > of the > compartment. > > Any idea for the top elevator cable? > > Serge Vidal > KR2 "Kilimanjaro Cloud" > Paris, France > > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html > >
Virgil N. Salisbury - AMSOIL www.lubedealer.com/salisbury Miami ,Fl
