At 11:41 AM 5/8/2005, you wrote: >I will have to make one or several inspection hatches on my tail section, >for the following reasons: >1 - I need to replace the elevator cables; >2 - I need to remove the tail wheel spring; >3 - I need to be able to inspect the rudder and elevator hinges nuts.
I have one access hole under the stab that is about 4" tall by 6" long. a removable section at the back of the turtleback, and inspection ports at the top and bottom of the elevator horns. These are 2" in diameter and are will be covered with recessed plexiglass covers so that I can see the horns. There are pictures of most of this on my web site. Don Reid - donreid "at" peoplepc.com Bumpass, Va Visit my web sites at: AeroFoil, a 2-D Airfoil Design And Analysis Computer Program: http://aerofoilengineering.com KR2XL construction: http://aerofoilengineering.com/KR/KR2XL.htm Aviation Surplus: http://aerofoilengineering.com/PartsListing/Airparts.htm EAA Chapter 231: http://eaa231.org Ultralights: http://usua250.org VA EAA State Fly-in: http://vaeaa.org
