Peel Ply is a very fine weave dacron type of cloth. Once you have done your glass lay up, Peel Ply is placed on top of the wetted glass. It will soak up any excess resin in the wetted glass. You want the Peel Ply to become completely wetted out also. If it does not soak up enough from the wetted glass to become completely wetted out then add some epoxy to the Peel Ply. Allow the epoxy to completely cure then peel the Peel Ply from your lay up. This process will give you a very smooth surface which requires little finishing before priming.
Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my NEW KR-2S CorvAIRCRAFT web site at www.flykr2s.com ----- Original Message ----- From: <[email protected]> To: <[email protected]> Sent: Monday, April 10, 2006 7:24 PM Subject: KR> peel ply > Hi, > > Can someone expail what peel ply is too? Sorry > > David Swanson > [email protected] > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html >
