Never tried it, but I think that if you sanded it down a little, then put on some resin and laid the peel ply on that, it might work. Try a test and see. From: "Phil Matheson" <[email protected]> List-Post: [email protected] Date: 2006/04/11 Tue PM 03:44:18 CDT To: "KRnet" <[email protected]> Subject: Re: KR> peel ply
Another Question Does peel ply work just as well over a already dry lay up, If I wanted to add a glass lay up over an inner wing to help remove the pin holes, because I did not have peel ply when I first glassed the inner wing??? Hope that makes sense????? Phil Matheson [email protected] New Web Page : http://www.philskr2.50megs.com/ VH-PKR ( Phil's KR) 61 3 58833588 Australia.( Down Under) See My KR2 Building Web Page at: OLD WEB: http://mywebpage.netscape.com/flyingkrphil/VHPKR.html See our VW Engines and Home built web page at http://www.vw-engines.com/ www.homebuilt-aviation.com/ _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html
